| Customization: | Available |
|---|---|
| Installation: | Cover Plate |
| Drive: | Electric Hydraulic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Displacement Group | 6 | 8 | 0 | 1 | 2 |
| Displacement (ml/r) | 260 | 376 | 468 | 514 | 560 |
| Theoretical Torque at 10Mpa (N.m) | 413 | 598 | 744 | 817 | 890 |
| Rated Speed (r/min) | 160 | 160 | 125 | 125 | 125 |
| Rated Pressure (Mpa) | 25 | 25 | 25 | 25 | 25 |
| Rated Torque (N.m) | 850 | 1200 | 1500 | 1650 | 1800 |
| Max. Pressure (Mpa) | 31.5 | 31.5 | 31.5 | 31.5 | 31.5 |
| Max. Torque (N.m) | 1050 | 1500 | 1850 | 2050 | 2250 |
| Speed Range (r/min) | 0-200 | 0-200 | 0-200 | 0-200 | 0-160 |
| Max. Power (kw) | Standard displacement is 29KW,variable displacement priority rotation 19KW,no priority is 15KW | ||||
MSE05
| Displacement Group | 8 | 0 | 1 | 2 | 3 |
| Displacement (ml/r) | 530 | 625 | 688 | 750 | 820 |
| Theoretical Torque at 10Mpa (N.m) | 843 | 994 | 1094 | 1193 | 1304 |
| Rated Speed (r/min) | 100 | 100 | 100 | 80 | 80 |
| Rated Pressure (Mpa) | 25 | 25 | 25 | 25 | 25 |
| Rated Torque (N.m) | 1700 | 2050 | 2250 | 2450 | 2650 |
| Max. Pressure (Mpa) | 31.5 | 31.5 | 31.5 | 31.5 | 31.5 |
| Max. Torque (N.m) | 2100 | 2500 | 2750 | 3000 | 3300 |
| Speed Range (r/min) | 0-160 | 0-160 | 0-160 | 0-125 | 0-125 |
| Max. Power (kw) | Standard displacement is 29KW,variable displacement priority rotation 19KW,no priority is 15KW | ||||
The correct choice of hydraulic fluid requires knowledge of the operating temperature in relation to the ambient temperature: in a closed circuit the circuit temperature. The hydraulic fluid should be chosen so that the operating viscosity in the operating temperature range is within the optimum range - the shaded area of the selection diagram. We recommended that the higher viscosity class be selected in each case. Example: At an ambient temperature of X °C an operating temperature of 60 °C is set. In the optimum operating viscosity range (shaded area) this corresponds to the viscosity classes VG 46 or VG 68; to be selected: VG 68. Please note: The case drain temperature, which is affected by pressure and speed, is always higher than the circuit temperature. At no point in the system may the temperature be higher than 115 °C. If the above conditions cannot be maintained due to extreme operating parameters.
Hydraulic fluid:
Before starting project planning, please refer to our data sheets RE 90220 (mineral oil), RE 90221 (environmentally acceptable hydraulic fluids) and RE 90223 (HF hydraulic fluids) for detailed information regarding the choice of hydraulic fluid and application conditions. The variable pump A4VG is unsuitable for operation with HFA, HFB and HFC. If HFD or environmentally acceptable hydraulic fluids are being used, the limitations regarding technical data and seals mentioned in RE 90221 and RE 90223 must be observed. When ordering, please indicate the used hydraulic fluid.
Perfect replace
Intermot IAM/NHM;
Calzoni MRC/MRCN;
Staffa STF;
and other brand...
Advantages:
1. Low speed, high torque
2. Perfect reliability,high efficiency and long life
3. Low noise and wide range of speed
4. Widely applicable for agriculture machinery, fishing machinery, plastic industry, mining, and construction machinery, especially fitted to lower load applications, such as plastic injection mold machine, cleaner, grass cutter, etc.
5. Very competitive price
6. 1 year of warranty
){kind=link}